Wood burning is an art without limits. If you are good at it, you can design just about anything on the planet. From pyrography signs to engagement wood slice, there is a lot you can create with the best wood burning tools.
But what if you are a complete beginner to pyrography? Can you still design unique projects as a beginner? Well, yes you can. If you are new to the art of wood burning, here are tips that can help you step the right foot forward.
The first step to building your pyrography skills is to understand the tools. Isirish has a list of the types of wood burning tools worth checking out.
Know the Basic Wood Burning Tools
There are three basic styles of wood burning tools – one temperature units, rheostat temperature units, and variable temperature units. In this article by Lora S. Irish, we will look at each style, how each wood burning tool controls the tonal values of your burnings, and which style is best for you.
There are at least three types of tools that you can use. The tool you use for wood burning depends on your preference, cost, as well as the project you would like to create.
Now that you understand the types of tools used in pyrography, you need to know the type of wood that’s recommended for pyrography. That’s what DIY Candy recommends, and it is exactly what you should do.
Pick the Best Wood
Type of Wood: The best types of wood for great burning projects are soft woods with a minimal grain, such as pine or fir.
Keep in mind that not all woods are good for burning with fire. As such, you should use only the recommended type of wood for the project.
Burning wood freehand is a great art. According to Life Hacker, it allows for the most creativity. However, it is not the best technique for beginners like you. As such, it is best to use the burn a copy technique.
Start by Burning a Copy
Going freehand allows for the most creativity, but using carbon paper allows for greater accuracy. Place the carbon paper on your board and under a design you’ve drawn or printed out, then trace over the design with a pencil to apply the mark to your board. Then use your pyrography pen and follow the pencil lines on the wood.
You should burn a copy all the time, at least until you master the art. Then you can go freehand thereafter.
Conclusion
There is a lot to learn about pyrography. So it is best if you build your knowledge base on wood burning day after day. If you would like to learn more about pyrography, feel free to check our homepage for more pyrography tips.
Comment Policy:Your words are your own, so be nice and helpful if you can. Please, only use your real name and limit the amount of links submitted in your comment. We accept clean XHTML in comments, but don't overdo it please.